To make it easier to design your own baseboard for ITEAD CORE, we release this itead-core library for eagle, you can just add it into your schematic and build your customized basebaord.
The Drill is 18min , and the Diameter is 26 mil, so the gap between two pads is just about 12.5mil, and if you need to layout one wire between two pads, the linewidth can not larger than 4mil, and please note that this is out of our PCB prototyping service's technological limits.
And please remenber to change the design role in Eagle , the min restring for pads should be less than 4mil:
You can download the egale library here:
ITEAD CORE Eagle Library (5.7 KiB, 227 hits)
We will release a tutorial to show you how to build a simple opensource baseboard with eagle, stay tuned !